Skip to main content

Maintenance of Vanemar Smoke Detector

Learn how to maintain your Vanemar Smoke Detector for reliable smoke detection and long-term performance.

Overview

Regular maintenance ensures your Vanemar Smoke Detector continues to protect your boat by detecting smoke and sending timely alerts. With a few simple steps, you can keep the device in peak working condition and extend its service life.


Monthly Testing

  • Press the Test Button once a month.

  • A loud “Di-Di-Di” siren and rapid red LED flashes confirm the detector is working correctly.

  • If there is no response, check or replace the battery.

→ For step-by-step instructions, see Testing the Vanemar Smoke Detector


Battery Care

  • Replace the battery as soon as you receive a low-battery notification in the Vanemar App or hear a single “Di” beep every 53 seconds.

  • Only use a recommended CR123A or CR17335 lithium battery.

Warning: Do not use leaking, damaged, or incompatible batteries, as they may damage the device.


Cleaning the Detector

  • Gently wipe the exterior of the Vanemar Smoke Detector with a soft, dry cloth.

  • Avoid using water, solvents, or compressed air, as these can damage internal components.

  • Keep the vents clear of dust and debris to prevent false alarms.


After a Smoke Detection Event

  • If the detector has been exposed to smoke or heat from a fire, replace it immediately.

  • Even if the device still appears to function, exposure to smoke and heat can reduce sensor sensitivity and reliability.


General Care

  • Avoid installing the detector in areas with excessive dust, steam, or direct airflow from heaters or AC vents.

  • Ensure the detector remains within range of the Vanemar Gateway for reliable communication.

  • Periodically check the detector's connection status in the Vanemar App.

Tip: Keep a spare CR123A/CR17335 battery onboard so you can replace it immediately when needed.


When to Replace the Device

Replace your Vanemar Smoke Detector immediately if:

  • It consistently fails testing even with a new battery.

  • The housing or internal components show signs of physical damage.

  • It has been exposed to smoke or extreme heat during a fire.

Did this answer your question?