Skip to main content

Changing the Battery of Vanemar Smoke Detector

Learn when and how to replace the lithium battery in your Vanemar Smoke Detector without any special tools.

Overview

The Vanemar Smoke Detector is powered by a long-lasting lithium battery. Replacing the battery on time ensures your detector continues to detect smoke and send real-time alerts through the Vanemar App. The replacement process is quick and tool-free.

When to Replace the Battery

Replace the battery immediately if you notice any of the following:

  • A low-battery notification in the Vanemar App.

  • The detector emitting a single “Di” beep every 53 seconds.

  • The device failing to sound during a monthly test.


Battery Type

  • 1 × CR123A or CR17335 lithium battery


Battery Replacement Steps

  1. Detach the Detector: Twist the Smoke Detector counterclockwise to release it from the mounting bracket.

  2. Open the Battery Compartment: Carefully open the battery cover on the back of the device.

  3. Replace the Battery: Remove the old battery and insert the new one, making sure the + / – polarity matches the markings inside.

  4. Reattach the Detector: Align the detector with the mounting bracket and twist clockwise until it clicks into place.

  5. Test the Device: Press the Test Button on the front to confirm the siren sounds, the red LED flashes, and the device shows as active in the Vanemar App. For detailed steps, see Testing the Vanemar Smoke Detector.

Replacing the CR17335/CR123A lithium battery inside the Vanemar Smoke Detector with correct +/– polarity, then twisting the detector clockwise onto the ceiling mounting bracket until it clicks.

Test the Device

  • Press the Test Button on the front of the sensor.

  • Confirm the loud siren and flashing red LED are activated.

  • Check that the Vanemar App shows the device as active.

→ For details on how to test Smoke Sensor, visit Testing the Vanemar Smoke Sensor support article.

Did this answer your question?