Overview
Regular testing ensures your Vanemar Smoke Detector is working properly and ready to protect your boat. A quick test confirms that the siren, LED indicator, and Vanemar App notifications are functioning as expected. Test the detector once a month and immediately after any battery replacement.
Testing Steps
Locate the Test Button: Find the Test Button on the front of the Smoke Detector.
Press and Hold: Press and hold the Test Button firmly for a few seconds.
Verify the Response: The detector should emit a loud “Di-Di-Di” siren and flash the red LED rapidly.
Check the Vanemar App: Confirm that you receive a test alert notification in the app.
Safety & Maintenance Notes
Never Use Open Flame or Smoke: Only use the Test Button to test the device. Exposing the detector to fire or smoke can damage the sensor chamber and reduce reliability.
If There Is No Response: Check that the battery is properly installed, replace the battery if needed (see Changing the Battery of Vanemar Smoke Detector), and ensure the detector is within range of the Vanemar Gateway.
When to Replace the Detector: Replace the device immediately if it fails to respond after a battery check, or if it has been exposed to smoke during a real fire event.
Warning: Never use an open flame or smoke to test the detector—always use the Test Button. If your Vanemar Smoke Detector has been exposed to smoke or extreme heat during a real fire event, replace the device immediately, as its sensor reliability may be compromised.

