Overview
The Smart Plug is simple to use: plug it in, pair it, and control devices while remotely monitoring shore-power status from your smartphone.
Safety and Preparation
Be cautious when working with AC mains. If unsure, seek professional assistance.
Ensure the boat is stationary and moored before installation.
Keep the installation area tidy and ventilated.
Plugging into the Outlet
Insert the Smart Plug into a dry, indoor AC outlet.
Confirm the outlet is live before pairing.
Avoid damp or humid conditions that could damage the device.
Installation Precautions
Only use indoors, away from splashing water.
Do not exceed the rated maximum load (2400 W AU / 3000 W US).
Keep away from direct heat sources.Tips for Best Results
Use the button to toggle power manually or the Vanemar App for remote control.
Monitor LED colors to understand device status.
Place plugs mid-cabin or between sensors and the Gateway to maximize ZigBee mesh reliability.
Tip: See How to Optimize and Extend Your Vanemar Wireless Sensor Network for guidance on placement.