Before You Start
Ensure the outlet has power.
Plug the Smart Plug into a dry, indoor outlet.
Make sure the Vanemar Gateway is powered on and connected.
Open the Vanemar App on your smartphone.
Pairing Vanemar Smart Plug Step-by-Step
Open the Vanemar App → Go to Devices → Tap “+ Add Device”.
On the Smart Plug, press and hold the Power/Networking button until the LED starts flashing:
AU version: Blue or purple flashing = pairing mode.
US version: Rapid blue flashing = pairing mode.
3. Follow the in-app instructions to complete pairing.
Verify success:
AU version → Solid Red = ON and paired.
US version → Solid Blue = ON.
Unpairing the Vanemar Smart Plug
Ensure the plug is powered.
Press and hold the Power/Networking button until the LED indicates unpairing:
AU version: LED flashes blue or purple, then release.
US version: LED flashes slowly.
3. Remove the device from the Vanemar App if still listed.
Tips for Successful Pairing
Place the Smart Plug within range of the Gateway (≤100 m open area).
Avoid damp, humid environments during setup.
Use Smart Plugs strategically to extend ZigBee coverage across your boat.