Skip to main content

Pairing Vanemar Motion Sensor

Learn how to pair your Vanemar Motion Sensor with the Vanemar Gateway using the Vanemar App.

Overview

Pairing your Vanemar Motion Sensor with the Vanemar Gateway lets you monitor detected motion in the Vanemar App. Pairing is required to connect the sensor to your Vanemar system.

Before You Start

  • Ensure the battery insulation pull tab is removed before pairing.

  • Open the Vanemar App.

Pairing Steps

  1. Tap “+” or “Add device” in the Devices menu and follow the on-screen instructions.

  2. Press and hold the networking button with the included reset tool until the green LED starts flashing rapidly. The device is now ready to pair.

  3. Once successfully paired, the LED will remain solid green for 3 seconds before turning off.

Pressing the Motion Sensor pairing button with the reset tool.

  1. Reset Button (Reset Button)

  2. LED Status Indicator

Did this answer your question?

Related Articles