Overview
Pairing your NMEA 2000 Boat Adapter with the Vanemar Gateway ensures seamless data transfer from your boat’s systems into the Vanemar App. The process is quick and only requires the app and a secure Wi-Fi connection.
Before You Start
Ensure the Vanemar Gateway is powered and connected to the internet.
Download and open the Vanemar App.
Verify the NMEA 2000 backbone has proper termination and power.
Pairing Vanemar NMEA 2000 Boat Adapter Step-by-Step
Open the Vanemar App → Go to Devices → Tap + Add Device
2. Power the NMEA 2000 backbone; ensure adapter LEDs are active
3. Press and hold the adapter’s networking button with the reset tool until the Status LED begins flashing
4. Follow the on-screen instructions in the app
5. Once paired, the Status LED will stay solid
Tips for Successful Pairing
Ensure strong Wi-Fi signal in the installation area
Double-check SSID and Wi-Fi password when in client mode
Do not disconnect power during firmware updates (PWR LED flashing fast)