Skip to main content

Pairing Vanemar Temperature & Humidity Sensor

Step-by-step guide to pair your Vanemar Temperature & Humidity Sensor with the Vanemar Gateway using the Vanemar App.

Overview

Pairing lets you view your Temperature & Humidity Sensor’s readings in real time in the Vanemar App. Pairing is required to connect the sensor to your Vanemar system.

Before You Start

  • Make sure a CR2450 battery is correctly installed in the sensor.

  • Open the Vanemar App.

Vanemar app diagram showing the Devices menu and highlighting the plus icon to add a new device.

Pairing Steps

  1. Tap “+” or “Add device” in the Devices menu and follow the on-screen instructions.

  2. Press and hold the networking button with the included reset tool until the pairing icon on the sensor’s display starts flashing. The device is now ready to pair.

  3. Once successfully paired, the pairing icon will remain steady on the display.

Vanemar sensor pairing diagram showing the device display and a hand using the reset tool to press the networking button.

Did this answer your question?