Skip to main content

Meet Vanemar Carbon Monoxide Detector

Learn about the Vanemar Carbon Monoxide Detector, its functions, indicators, box contents, and technical specifications.

Vanemar Carbon Monoxide Detector

Designed to enhance safety on your boat, the Vanemar Carbon Monoxide Detector monitors carbon monoxide levels in the air and triggers an onboard alarm while alerting you through the Vanemar App.

  • Monitors carbon monoxide levels and sounds a loud onboard siren (≥85 dB at 3 m) when concentrations exceed safe thresholds (30 ppm in 120 min, 50 ppm in 60–90 min, 100 ppm in 10–40 min, 300 ppm in 3 min).

  • Sends instant real-time notifications via the Vanemar Gateway.

  • Warns when the device's battery is low, a fault occurs, or the 5-year sensor reaches its end of life.

Vanemar Carbon Monoxide Detector parts diagram

  1. Networking Button

  2. LED Status Indicator

  3. Test / Hush Button

  4. Mounting Bracket

Note: The Vanemar Carbon Monoxide Detector is designed to detect carbon monoxide levels and provide alerts. It does not have the capability to eliminate or neutralize carbon monoxide.


In the Box

In the box contents showing the Carbon Monoxide Detector, Mounting Bracket, Screws and Dowels, and Reset Tool

  1. Carbon Monoxide Detector

  2. Mounting Bracket

  3. Screws and Dowels

  4. Reset Tool


Indicators

CO & Status Indicators

LED

Siren

Meaning

Green flash every 30 sec

—

Normal operation

Red flash every 5 sec

“Di-Di-Di-Di” every 5 sec

Carbon monoxide alarm

Red flash 4 times

“Di-Di-Di-Di”

Test mode

Yellow flash every 30 sec

“Di” every 30 sec

Low battery

Yellow flash twice every 30 sec

Fault

Yellow flash twice every 30 sec

One long and one short beep every 30 sec

End of life (5 years)

Networking & Pairing Indicators

LED

Status

Rapid green flash

Searching for Gateway (Pairing mode)

Slow green flash

Unpaired

Solid green for 3 sec, then off

Paired successfully

Technical Specs Tablosu

Specification

Detail

Model

HS1CA

Working Voltage

DC 3V (CR17335 / CR123A lithium battery)

Alarm Sound

≥85 dB (at 3 m / 10 ft)

Alarm Sensitivity

30 ppm (120 min)

50 ppm (60–90 min)

100 ppm (10–40 min)

300 ppm (3 min)

Wireless Range

≤70 m (≤230 ft, open area)

Working Temperature

-10°C ~ 40°C (14°F ~ 104°F)

Working Humidity

≤95% RH (non-condensing)

Dimensions

60 × 60 × 49.2 mm (2.36 × 2.36 × 1.94 in)

FCC

✓

Did this answer your question?