Skip to main content

Changing the Battery of Vanemar Carbon Monoxide Detector

Learn when and how to replace the lithium battery in your Vanemar Carbon Monoxide Detector without any special tools.

Overview

The Vanemar Carbon Monoxide Detector is powered by a long-lasting lithium battery. Replacing the battery on time ensures your detector continues to monitor carbon monoxide levels and send real-time alerts through the Vanemar App. The replacement process is quick and tool-free.

When to Replace the Battery

Replace the battery immediately if you notice any of the following:

  • A low-battery notification in the Vanemar App.

  • The yellow LED flashing once with a single “Di” beep every 30 seconds.

  • The device failing to respond during a monthly test.

Battery Type

  • 1 × CR123A or CR17335 lithium battery (3V DC)


Battery Replacement Steps

  1. Detach the Detector: Twist the Carbon Monoxide Detector counterclockwise to release it from the mounting bracket.

  2. Open the Battery Compartment: Carefully open the battery cover on the back of the device.

  3. Replace the Battery: Remove the old battery and insert the new one, making sure the + / – polarity matches the markings inside.

  4. Reattach the Detector: Align the detector with the mounting bracket and twist clockwise until it clicks into place.

  5. Test the Device: Press the Test / Hush Button on the front to confirm the siren sounds, the red LED flashes, and the device shows as active in the Vanemar App. For detailed steps, see Testing & Hushing the Vanemar Carbon Monoxide Detector.

Illustration showing how to replace the battery in the Vanemar Carbon Monoxide Detector: inserting a CR17335 or CR123A lithium battery with matching + / – polarity into the rear battery compartment, then twisting the detector clockwise onto the ceiling mounting bracket until it clicks.


Test the Device

  • Press the Test / Hush Button on the front of the detector.

  • Confirm the loud “Di-Di-Di-Di” siren and flashing red LED are activated.

  • Check that the Vanemar App shows the device as active.

→ For details on how to test the Carbon Monoxide Detector, visit the Testing & Hushing the Vanemar Carbon Monoxide Detector support article.

Did this answer your question?