Skip to main content

Maintenance of Vanemar Carbon Monoxide Detector

Follow these maintenance tips to keep your Vanemar Carbon Monoxide Detector working properly.

Overview

To keep your Vanemar Carbon Monoxide Detector working properly, it is important to perform regular maintenance and testing.

Maintenance Tips

  • Monthly Testing: Test the device every month by pressing the Test / Hush Button. It should beep and flash red quickly. If it does this, it means the detector is working fine.

  • Battery Replacement: Keep an eye on the device's battery status. Replace the battery as soon as you receive a low-battery warning from the Vanemar App (see Changing the Battery of Vanemar Carbon Monoxide Detector). We advise testing the device after putting in a new battery.

  • Cleaning: Clean the unit once a month using a household vacuum cleaner or a soft brush. Do not use cleansers, solvents, or spray products (such as air fresheners, paint, or aerosols) near the sensors.

  • End of Life: The alarm has a working lifespan of about 5 years and should be replaced every 5 years, even if no fault is detected. Replace the unit immediately if it gives an end-of-life warning.

Did this answer your question?