Overview
Regular testing ensures your Vanemar Carbon Monoxide Detector is working properly and ready to protect your boat. A quick test confirms that the siren, LED indicator, and Vanemar App notifications are functioning as expected. Test the detector once a month and immediately after any battery replacement.
Testing Steps
Locate the Test / Hush Button: Find the Test / Hush Button on the front of the Carbon Monoxide Detector.
Press the Button: Press the Test / Hush Button firmly.
Verify the Response: The detector should emit a loud “Di-Di-Di-Di” sound and flash the red LED quickly (4 times), indicating it is working as expected.
Check the Vanemar App: Confirm that you receive a test alert notification in the app.
Hushing a False Alarm
If the alarm sounds due to a suspected false alarm:
Press the Test / Hush Button on the front of the detector.
The alarm will stay silent for 10 minutes while continuing to monitor the air.
If dangerous carbon monoxide levels are still present after 10 minutes, the alarm will sound again automatically.
Safety & Maintenance Notes
Only Use the Test / Hush Button: Do not use exhaust fumes, smoke, or aerosol sprays near the sensor to test the device, as they can damage or contaminate the sensor.
If There Is No Response: Check that the battery is not depleted and is properly installed (see Changing the Battery of Vanemar Carbon Monoxide Detector), and ensure the detector is within range of the Vanemar Gateway.
When to Replace the Detector: Replace the device immediately if it fails to respond after a battery check, or when it reaches its 5-year service lifespan (see Maintenance of Vanemar Carbon Monoxide Detector).
Warning: Never use carbon monoxide sources, exhaust fumes, or chemical sprays to test the detector. Always use the (Test / Hush Button). If a real carbon monoxide alarm occurs, ventilate the area and move to fresh air immediately before investigating.

