Overview
Proper placement of the Vanemar Entry Sensor ensures reliable detection of door, window, or drawer openings.
Safety and Preparation
Make sure your boat is stationary and securely moored.
Work in a well-lit and uncluttered area.
Choosing the Best Location
Install indoors on the inner side of a door, hatch, or window.
Attach the magnet to the moving part (e.g., door or window).
Ensure the gap between sensor and magnet does not exceed 15 mm (0.6 in).
Mounting Options
Fixing in Place
Choose a flat indoor spot for installation, such as on the inner side of a door, window, or drawer.
Attach the magnet to the moving part (e.g., the door or window itself).
Make sure the surface is clean before mounting.
The distance between the sensor and the magnet should not exceed 15 mm (0.6 in).
5. The magnet can be placed on either side of the sensor for flexibility.
6. To install, slide the cover off the sensor, peel the double-sided tape on both the cover and magnet, and press them firmly into place.
7. Finally, slide the sensor body back onto its cover to complete the installation.
Tips for Best Results
Clean the surface before mounting.
The magnet can be placed on either side of the sensor for flexibility.
Test the sensor in the Vanemar App after installation.