Before You Start
Securing the Boat: Before beginning installation, make sure the boat is stationary and securely moored to provide a stable environment.
Work Environment: Ensure the area is well-ventilated and free of clutter to facilitate a safe installation process.
Installation Precautions
Install the sensor indoors on a stable surface, considering its field of view to ensure a clear view of potential intruder paths. To prevent false alarms, position the sensor where animals and moving objects (such as fans) won't enter its field of view, and avoid areas where temperature changes from air conditioners, heaters, or direct sunlight could be mistaken for movement.
Placement
Pick a flat indoor spot where the motion sensor can see the area you want to monitor, making sure nothing blocks its view. See "Detecting Area" and "Installation Precautions" below for detailed guidance.
Mounting Option 1 / Using the Mounting Bracket
Ensure the surface is clean before applying the adhesive, then press firmly. Using the mounting bracket, the sensor can be installed on walls or ceilings, allowing easier adjustment of its angle and position.
Peel off the backing from one side of the double-sided adhesive tape and attach the tape to the mounting bracket.
Peel off the remaining backing and mount the bracket in the desired position on the wall or ceiling.
Attach the sensor body to the mounting bracket. For wall mounting, align the wall mounting mark on the bracket with the alignment mark (“UP”) on the sensor body. For ceiling mounting, align the ceiling mounting mark with the same alignment mark.
Icon | Explanation |
 | Wall mounting mark. |
 | Ceiling mounting mark. |
 | Alignment mark on the sensor body. |
Mounting Option 2 / Direct Wall Mount
Peel one side of the double-sided adhesive tape and attach it to the sensor body as shown.
Peel the other side and mount the sensor to the desired position on the wall.
Ensure the up-facing icon on the bottom cover points upward during installation.
Important: The disassembly hole is located at the bottom of the device. Leave enough space below the sensor to allow easy removal.
Detecting Area
Ceiling Mounting
Wall Mounting