Before You Start
Securing the Boat: Make sure your boat is stationary and securely moored before beginning installation.
Work Environment: Keep the installation area clear and well-ventilated.
Note: Pair your Vanemar Temperature & Humidity Sensor with the Gateway before mounting it. Follow the Pairing Vanemar Temperature & Humidity Sensor guide.
Placement Suggestions (Choose an Indoor Location)
Choose an indoor location where monitoring temperature and humidity is important.
Position the sensor away from air conditioners, heaters, and other equipment that may affect its measurements.
Choose a suitable installation surface based on your preferred mounting option.
Mounting Options
Option 1: Wall Mounting
Choose a smooth, solid, dry, and clean wall surface.
Step 2: Attach the Adhesive Tape
Attach the included double-sided adhesive tape to the back of the sensor.
Step 3: Mount the Sensor
Position the sensor against the wall and press firmly to secure it in place.
Option 2: Desktop Mounting
Step 1: Attach the Desktop Bracket
Attach the desktop bracket to the sensor's cover.
Step 2: Prepare the Surface
Choose a smooth, firm, dry, and clean surface.
Step 3: Secure the Sensor
Use the included double-sided adhesive tape to secure the desktop bracket to the mounting surface, especially when the boat is moving.
Make sure the sensor and bracket are firmly positioned.
Check the Installation
Once your sensor is installed:
Make sure the sensor is securely positioned.
Check that it is away from air conditioners and heaters that could affect its measurements.
Confirm that temperature and humidity readings are visible on the sensor's display.