Overview
Pairing your Boat Moisture Meter and Temperature Gauge with the Vanemar Gateway is essential for real-time monitoring and remote alerts. The process takes just a few minutes and ensures your sensor can send temperature and humidity data directly to the Vanemar App.
Before You Start
Ensure your Vanemar Gateway is powered on and connected to the internet.
Download and open the Vanemar App on your smartphone.
Remove the battery insulation pull tab from the sensor if this is the first setup.
Networking Indicators
Pairing Vanemar Boat Moisture Meter and Temperature Gauge Step-by-Step
Open the Vanemar App and go to Devices.
Tap the ‘+’ Add Device button.
3. Locate the networking button on the sensor. Using the included reset tool, press and hold the button until the pairing icon on the display begins flashing.
4. Follow the on-screen instructions in the app to complete pairing.
5. Once paired successfully, the pairing icon will remain solid on the sensor’s display.
Unpairing the Device
If you need to remove the sensor from your system:
Press and hold the networking button with the reset tool until the pairing icon disappears from the display.
Tips for Successful Pairing
Make sure the sensor is within 100 m (328 ft) in open space of the Vanemar Gateway during pairing.
If pairing fails, try resetting the sensor and repeat the steps.
Ensure your smartphone and Gateway are connected to the same network during setup.